Zyxel NXC Series
Renato.neves (Talk | contribs) (Created page with "The following guide was created using a Zyxel wireless network with the following components: * Controller: Zyxel NXC2500 * AP: Zyxel NWA5123-NI * Firmware: V5.00(AAIG.3) / V...") |
Renato.neves (Talk | contribs) |
||
| Line 30: | Line 30: | ||
<span style="color: red">Important:</span> the RADIUS key (shared secret) must be up to 15 alphanumeric characters. | <span style="color: red">Important:</span> the RADIUS key (shared secret) must be up to 15 alphanumeric characters. | ||
| + | |||
| + | == Authentication Method == | ||
| + | |||
| + | Go to "Configuration > Object > Auth. Method" and click in Add to create a new authentication method. | ||
| + | |||
| + | Set a name such as "social-id-auth" and add the previously RADIUS server created (e.g.: "group social-id-radius"): | ||
| + | |||
| + | [[File:Zyxel-2-auth-method.png|800px]] | ||
Revision as of 20:22, 1 June 2017
The following guide was created using a Zyxel wireless network with the following components:
- Controller: Zyxel NXC2500
- AP: Zyxel NWA5123-NI
- Firmware: V5.00(AAIG.3) / V1.03 / 2017-02-03 07:02:31
Contents |
Configuring the RADIUS Server
Configure the Social-ID RADIUS server by creating a new AAA Server.
Go to "Configuration > Object > AAA Server" and click in the RADIUS tab.
Click to add a new RADIUS server, set a name such as "social-id-radius" and configure the authentication and accounting settings as follow.
RADIUS Authentication
- Server Address: radius.socialidnow.com
- Authentication Port: 1812
- Key: the provided RADIUS client secret
RADIUS Accounting
- Server Address: radius.socialidnow.com
- Authentication Port: 1813
- Key: the provided RADIUS client secret
You can also enable "Accounting Interim Update" to send accounting information in the desired interval.
Important: the RADIUS key (shared secret) must be up to 15 alphanumeric characters.
Authentication Method
Go to "Configuration > Object > Auth. Method" and click in Add to create a new authentication method.
Set a name such as "social-id-auth" and add the previously RADIUS server created (e.g.: "group social-id-radius"):
