Ruckus ZoneDirector

From Social ID Developers
Jump to: navigation, search

The following guide was created using a Ruckus wireless network with the following components:

  • Controller: Ruckus ZoneDirector 1100 (ZD1106)
  • AP: Ruckus ZoneFlex 7300 Series (zf7372)
  • Firmware: 9.8.3.0 build 14

Note that this guide supports only firmware version 9.8+.

Contents

Configuring the RADIUS server

Configure the Social-ID RADIUS server by creating a new AAA Server.

Go to "Configure > AAA Servers".

RADIUS Authentication

Click in the "Create New" link and fill the name, such as "AAA-SOCIAL-ID":

RuckusZD AAA policy.png

Then fill the following info:

  • Type: RADIUS
  • Auth Method: PAP
  • IP Address: 54.94.140.247
  • Port: 1812
  • Shared Secret: the provided RADIUS client secret
  • Confirm Secret: the provided RADIUS client secret

RADIUS Accounting

Create a new RADIUS server for Account. Click in the "Create New" link and fill the name, such as "AAA-SOCIAL-ID-ACCT":

RuckusZD RADIUS Accounting.png

Then fill the following info:

  • Type: RADIUS Accounting
  • IP Address: 54.94.140.247
  • Port: 1813
  • Shared Secret: the provided RADIUS client secret
  • Confirm Secret: the provided RADIUS client secret

Configuring the Hotspot service

Go to "Configure > Hotspot Services", click in the "Create New" link and fill the Name, such as "CP-SOCIAL-ID":

RuckusZD Hotspot Service.png

Then fill the following info:

  • Login Page: the provided captive portal login URL
  • Start Page: select "redirect to the following URL:" and fill the provided captive portal start URL
  • Authentication Server: the previously RADIUS Authentication Server created (e.g.: "AAA-SOCIAL-ID")
  • Accounting Server: the previously RADIUS Accounting Server created (e.g.: "AAA-SOCIAL-ID-ACCT")

Walled Garden

Allow Social-ID NOW platform URLs and social network URLs by configuring the Hotspot Walled Garden destinations.

Add the entries according to Walled Garden for the Social Login URLs:

RuckusZD Walled Garden.png

Configuring the WLAN

Now you need to create a Wireless LAN with the Hotspot Service previously created.

Go to "Configure > WLANs", click in the "Create New" link and fill the Name, such as "WLAN-SOCIAL-ID":

RuckusZD WLAN.png

Then fill the following info:

  • WLAN Usages > Type: Hotspot Service (WISPr)
  • Authentication Options > Method: Open
  • Encryption Options > Method: None
  • Options > Hotspot Services: the previously Hotspot Service created (e.g.: "CP-SOCIAL-ID")

WLAN Group

You need to associate the previously WLAN with a WLAN Group.

Probably you already have a "Default" one, but you can also create a new one and associate the previously WLAN as a "Member":

RuckusZD WLAN Group.png

Configuring the Access Points

Access Point Group

You need to associate the WLAN Group previously created/configured to your Access Points.

Go to "Configure > Access Points" and check "Access Point Groups" section.

Probably you already have a "System Default" one, but you can also create a new one and assign the previously WLAN Group by overriding the configuration:

Ruckus Access Point Group.png

Access Point

At the last step you need to check if the APs you want to provide the Hotspot Service are assigned to the Access Point Group previously created/configured:

RuckusZD Access Point.png

Personal tools
Namespaces
Variants
Actions
Navigation
Toolbox